Densifier and Chemicals

STARSEAL PS CLEAR

StarSeal PS Clear is a premium, silicate-blended liquid floor-hardening, densifying and dust proofing solution for long-term sealing and protection of concrete. StarSeal Permanent Sealer greatly enhances concrete's performance, strength and beauty with a permanent, maintenance-free shine and is immediately chemical, stain and wear resistant.

STARSEAL PS CLEAR HB

StarSeal HB is a premium, silicate-blended liquid floor-hardening, densifying and dust proofing solution for long term sealing and protection of concrete and is used when densifying soft or very porous concrete. This material is a high solids product that allows porous to be plugged in one or two coats.

STARSEAL FINISH COAT WB

StarSeal PS Finish Coat WB (Water Base) is part of the Vexcon Starseal system. It is clear water base, ready to use penetrating sealer.

STARSEAL FINISH COAT

StarSeal PS Finish Coat is part of the Vexcon StarSeal system. StarSeal PS Finish Coat stops the intrusion of water, salts, deicer chemicals, food acids and oil when used with the StarSeal PS system.

STARSEAL FIXATIVE

StarSeal Fixative is the only product in the market today that helps remove unwanted excess or residual unreacted silicate from polished concrete. Which is one of the main causes of polished concrete food staining. Using this product will increase the chemical resistance of polished concrete. Use when installing a StarSeal PS CLEAR FSR (Food Stain Resistant) system.

STARSEAL FUSION

StarSeal Fusion is an advanced, modified silicate concrete repair treatment for Certi-Shine polished floors. StarSeal Fusion will repair air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials will discolor the surface and leave it blotchy looking. StarSeal Fusion repairs and blends into the existing color of concrete yielding a consistent natural looking floor. 

CERTI-VEX CONCRETE ETCH

Certi-Vex Concrete Etch is a safe to use, non-hazardous interior/exterior, surface etch material specifically formulated to prepare the surface prior to final product application. It is designed to etch bare and masonry surfaces to improve adhesion of Vexcon coatings and penetration of surface treatments.